IS-I-508 Modular


Two PCBs up to 508 x 508 mm, in parallel operation and proven components. MicroDrop-Fluxer, IR-Top and Bottom-Preheater with Pyrometer, Titanium Selective soldering solder pot, wave height control, Automatic width adjustment of the conveyor, SMEMA



With two PCBs in parallel operation and proven components, this inline solution solder PCBs up to 508 x 508 mm. You are looking for the optimum balance between flexibility, throughput and large PCB size - the IS-I-508 was developed to meet this targets and can be easily integrated in your production, all this at an unbeatable price.


After Flux and preheating, the PCB moves into zone 2 of the machine, which is equipped according the configuration with 1 or 2 InterSelect titanium solder pots. The solder pot is mount on an InterSelect X-Y-Z-Axis system which positioning very accuracy to the programmed solder position.


With strong high mass PCBs, the standard nitrogen convection preheater is supported by a large-scale IR topside preheater. While preheating a pyrometer control and measures the exact temperature right on the PCB surface and continuously regulates the preheat temperature during soldering.


To further increase the level of automation, the process stability and reliability, several options can be installed in and on the machine.


The integration of this selective solder machine into your production, for example with a loader and unloader is easily possible, alternative the IS-I-508 can be connected with any other Inline module, such as AOI systems. Among other features the automatic width adjustment of the conveyor and SMEMA interface standard.



The turnkey-machine is set up and installed easy and can start production right after uncrating.


Solder Pot

All InterSelect selective soldering machines have a Titan solder pot which can handle all kinds of solder alloy. By default the machine is equipped with nitrogen insertion and cover. The intelligent setting makes maintenance and cleaning of the solder pot and the solder simple and quick.



The MicroDrop-Jet Fluxer has a Flux-Tank with pressure control and accepts alcohol- and water-based flux types. With an accuracy and repeatability of ± 0.1mm the micro-drop Fluxer reaches a speed of up to 200mm/s  



The optional Top- and Bottom-Preheater with infrared emitters can be adjusted depending on the board size to ensure energy-efficient production. While preheating a pyrometer control measures the exact temperature right on the PCB surface and continuously regulates the heating power.


PC and Software

The machine has an integrated PC running Windows and pre-installed machine software. The soldering software features 3 password protected user levels and is designed with an emphasis on intuitive operation.

Technical Spécifications:

Footprint:2200 x 1100 x 1260mm ( LxBxH)

PCB holder:Length min.max. 50-508mm
.Width min.max. 50-508mm
.Components above up to 120mm
.Components below up to 40mm
.Max weight 15 KG

Energy3 phase / 400V
.1,3 m³/h N2 bei 99,99% 
.3-6 bar compressed air

PreheatingIR Heater from 1,5 up to 6 KW above
.IR Heater from 1,5 up to 6 KW below

Solder pot12 KG
.Pump unit made of titanium
.Pot made of titanium

Video Youtube

Vidéo Youtube


PKF2 FPS-SitosecFPS_200ml_h600-RGB6

Nettoyants de précision Nettoyant sec à séchage ...

PKF2 Ordinet_100ml_h600-RGB5

Chasse l'humidité et protège. - Élimine l'humidité des ...

PKF2 Ordinet_100ml_h600-RGB

Nettoyant sec des têtes et disques magnétiques - ...

PKF2 FPS-SitosecFPS_200ml_h600-RGB

SITOSEC FPS Nettoyant sec à séchage rapide. - Nettoyant ...



Alimentation programmable 2x 0 -32V ; 0 - 6A ; 390W CODE ...


HDRE-2B: Station robotique 230V

imagen_01 (2)3

The ergonomic SF280-A Solder Feed Handle is compatible with ...


DMSE-2A: Station de soudage/dessoudage; digital; DES; 300W; ...

imagen_01 (2)

Ref. TESE-2A 230V TESE is a precision hot air station ...

imagen_01 (3)

Testeur de prise de terre: La terre est-elle bonne ? La ...

Sans cccccccccccc

TESE - Precision Hot Air station TESE is a precision hot ...