2704 Electronic Grade Coating

Fournisseurs3M

3M™ Novec™ 2704 Electronic Grade Coating is designed for the protection of printed circuit boards and electronic components. It is a clear, low viscosity solution of a 4 wt% fluoropolymer carried in a hydrofluoroether solvent. It is UV detectable.

Preloader

Fiche Technique

 

 

3M™ Novec™ 2704 Electronic Grade Coating is designed for the protection of printed circuit boards and electronic components. It is a clear, low viscosity solution of a 4 wt% fluoropolymer carried in a hydrofluoroether solvent. It is UV detectable.

Additional Information
3M™ Novec™ 2704 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components. It is a low viscosity, low surface tension solution of a 4 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent.

The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.

 

Benefits

  • Easy application and processing – dries in seconds without the need for thermal post-curing
  • Requires little or no masking
  • Allows solder-through repairability and is easily removed for rework & repair
  • Contains a low level of volatile organic compounds (VOCs) and has low global warming potential
  • Is thermally and electrically stable with excellent dielectric properties
  • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists
  • Contains a UV fluorescent dye incorporated into the polymer for improved QC inspection

PRODUITS EN PROMOTIONS

Promo!
PKF2 FPS-SitosecFPS_200ml_h600-RGB6

Nettoyants de précision Nettoyant sec à séchage ...

Promo!
PKF2 Ordinet_100ml_h600-RGB5

Chasse l'humidité et protège. - Élimine l'humidité des ...

Promo!
PKF2 Ordinet_100ml_h600-RGB

Nettoyant sec des têtes et disques magnétiques - ...

Promo!
PKF2 FPS-SitosecFPS_200ml_h600-RGB

SITOSEC FPS Nettoyant sec à séchage rapide. - Nettoyant ...

NOUVEAUX PRODUITS

New!
vvvvv

NASE Nano Rework station: Ref. : NASE-2B 230 V ,

New!
ca1954

Ergonomique, simple à utiliser, la caméra thermique C.A ...

New!
imagen_01 (3)8

Ref. CS-2E 230 V , CS is a desoldering station with an ...

New!
ca6526_f_2550-1000v_2

Contrôleur d’isolement et de Continuité, 50V-100V-250V-1 kV ...

New!
imagen_01 (2)3

The ergonomic SF280-A Solder Feed Handle is compatible with ...

New!
phpThumb_generated_thumbnailjpg

Permet à l'utilisateur d'effectuer facilement et ...

New!
imagen_01 (4)

Ref. CV-2E 230 V CV is a microdesoldering station using ...

New!
imagen_01 (5)

Ref. DI-2D 230 V